Compare the 60-pour cash flow, break-even payback point, and end-of-life scrap buyback credit between repeated timber plywood replacements and a single investment in SerPlywood polymer panels.
| Financial & Technical Parameter | Conventional Film-Faced Timber Plywood | SerPlywood 18 mm Polymer Formwork Panel |
|---|---|---|
| Average Initial Purchase Price | ~35 $ / sheet | ~65 $ / sheet |
| Average Jobsite Service Lifespan | 8 – 10 Pours | 60 – 80+ Pours |
| Panel Purchases Required for 60 Pours | 6 Replacement Batches (6 × $35 = $210) | Single Batch Investment (1 × $65 = $65) |
| Net Formwork Cost per Pour | ~3.50 $ – 4.35 $ / pour | ~0.85 $ – 1.08 $ / pour |
| End-of-Project Scrap Buyback Value | $0 (Waste Disposal Expense) | Guaranteed Cash Scrap Buyback |
| Release Agent Oil Consumption | High (Mandatory heavy oiling every pour) | Minimal (75%–90% lower consumption) |
| Net Jobsite Budget Savings | Baseline Reference | 70%+ Net Cost Savings per Pour |
Enter your formwork area and target pour cycles to calculate net cash savings, replacement batches avoided, and the exact break-even pour between timber plywood and SerPlywood:
Common questions regarding board selection, reuse cycles, technical parameters, and global delivery.
Pricing is determined by thickness (15, 18, 21 mm), cellular honeycomb engineering, order volume (sheets, pallets, full container/truckload), and delivery terms (jobsite, warehouse, or seaport).
Divide total contact area (m²) by sheet area (3.125 m² for 125×250 cm) and incorporate a 5–10% safety margin for cutting loss. Our online Formwork Quantity Calculator automates this calculation.
Domestic orders can be settled via bank transfer, card, or cash. International export orders are handled via Wire Transfer (T/T) or Letter of Credit (L/C) under agreed commercial terms.
Domestic orders are typically handled on a full pallet basis (standard 40–50 sheets), while export deliveries require 20' or 40' container loads. Contact sales for specific site requirements.
No, they belong to different material families. Having the same nominal thickness does not imply identical weight, stiffness, or handling conditions; products should be compared using verified technical data.
Share your required board dimensions, thickness, estimated quantity and delivery destination for a clearly scoped quotation.